Used 2015 Hurco Vmx60Ui 5 Axis Machinng Center Vertical Machining
Used 2015 Hurco Vmx60Ui 5 Axis Machinng Center Vertical Machining
Used 2015 Hurco Vmx60Ui 5 Axis Machinng Center Vertical Machining
Used 2015 Hurco Vmx60Ui 5 Axis Machinng Center Vertical Machining
Used 2015 Hurco Vmx60Ui 5 Axis Machinng Center Vertical Machining
Used 2015 Hurco Vmx60Ui 5 Axis Machinng Center Vertical Machining
Used 2015 Hurco Vmx60Ui 5 Axis Machinng Center Vertical Machining
Used 2015 Hurco Vmx60Ui 5 Axis Machinng Center Vertical Machining
Used 2015 Hurco Vmx60Ui 5 Axis Machinng Center Vertical Machining
Used 2015 Hurco Vmx60Ui 5 Axis Machinng Center Vertical Machining
Used 2015 Hurco Vmx60Ui 5 Axis Machinng Center Vertical Machining
Used 2015 Hurco Vmx60Ui 5 Axis Machinng Center Vertical Machining
Used 2015 Hurco Vmx60Ui 5 Axis Machinng Center Vertical Machining
Used 2015 Hurco Vmx60Ui 5 Axis Machinng Center Vertical Machining
Used 2015 Hurco Vmx60Ui 5 Axis Machinng Center Vertical Machining
Used 2015 Hurco Vmx60Ui 5 Axis Machinng Center Vertical Machining
Used 2015 Hurco Vmx60Ui 5 Axis Machinng Center Vertical Machining
Used 2015 Hurco Vmx60Ui 5 Axis Machinng Center Vertical Machining
Used 2015 Hurco Vmx60Ui 5 Axis Machinng Center Vertical Machining

Used 2015 Hurco VMX60Ui 5 Axis Machinng Center

General Specifications

X, Y, Z Axis Travel 60 x 26 x 20.5 in (1,524 x 660 X 520 mm)

A ,C Axis Travel +30°/-110°, 360°

Spindle Nose to Table (Min-Max) 3.5 in / 24 in (90 mm / 610 mm)

Table Size 19.7 in diameter (500 mm diameter)

 Max Weight on Rotary/ Trunnion Table 880 lbs (400 kg)

T-Slot Size 5 x .71 in (5 x 18 mm)

Peak Spindle Motor 24 hp @720 rpm (18 kW @720 rpm)

10k 210 ft-lbs @ 600 rpm (284 Nm @ 600 rpm)

12k 175 ft-lbs @ 720 rpm (237 Nm @ 720 rpm)

15k 140 ft-lbs @ 900 rpm (190 Nm @ 900 rpm)

Number Of Tools 40

Spindle Speed: 12,000 RPM

Tool Type CAT, BT, DIN 40

Max Tool Diameter 2.95 in (75 mm)

Max Tool Length 11.8 in (300 mm)

Max Tool Weight 15.4 lb (7 kg)

Max Programmable Feedrate 787 inches/minute (20 m/minute)

Rapid Traverse X,Y,Z Axis 1,181 in/min, 1,181 in/min, 787 in/min (30 m/minute, 30 m/minute, 20 m/minute)

Rapid Traverse A, C Axis 16.6 rpm, 20.8 rpm

Machine Height 123 in (3,124 mm)

Required Floor Space 214.8 x 180.7 in (5,455 x 4,590 mm)

Power Rating/ Full Load KVA 34 KVA

Machine Weight 18,800 lbs (8,545.5 kg)

Equipped With

High Pressure Coolant Through Spindle 300 PSI
Machine NCPP
Machine ISNC
Machine Part Probe
Machine Tool Probe
Machine Ultipockets
Machine Insert Pockets
Machine Rigid Tap
Machine MaxUI
Machine Centerline Probing
Machine Ramp Entry
 

SPECIFICATIONS ARE SUBJECT TO BUYER INSPECTION

DISCLAIMER: The information and specifications listed on this page are believed to be accurate. Photographic representations are for illustrative purposes only, and may not be of the actual machine. International Machine is not responsible for any typographical or other errors that may exist.


More from this collection