Used 2014 Southwest Trak Fhm 7 Vertical Mill
Used 2014 Southwest Trak Fhm 7 Vertical Mill
Used 2014 Southwest Trak Fhm 7 Vertical Mill
Used 2014 Southwest Trak Fhm 7 Vertical Mill
Used 2014 Southwest Trak Fhm 7 Vertical Mill
Used 2014 Southwest Trak Fhm 7 Vertical Mill

Used 2014 Southwest Trak FHM 7

General Specification

Machine specifications: Table size................................... 76" x 14"

T-slots (number x width x pitch)............. 4 x 16mm x 63.5mm 
Travel (X, Y, Z axis)........................ 60" x 23" x 20.5" 
Quill diameter............................... 5.06" 
Spindle taper................................ # 40 
Spindle speed range RPM...................... 200-5000 
Spindle center to column face................ 23" 
Spindle motor power.......................... 7.5 HP 
Power requirement, control................... 110V, 1P, 15A 
Power requirement, machine................... 220V, 3P, 60HZ Current, 
Full Load Amps...................... 37.5 FLA 
Maximum weight of workpiece.................. 2200 lbs. 
Height of table from bottom of bed........... 38.25" 
Maximum spindle nose to table................ 21.5" 
Minimum height............................... 95.5" 
Maximum height............................... 101" 
Width of machine including table............. 110.5" 
Length with electric box door closed......... 93.75" 
Overall width including full table travel.... 171.65" 
Overall length with electrical door open..... 119.5" 
Footprint.................................... 37" x 62.2" 
Way surface.................................. dovetail X axis; 
Way surface.................................. square ways Y and Z axis 
Weight (approximate) net..................... 7650 lbs. 
Weight (approximate) shipping................ 7975 lbs. 
Drilling max capacity........................ 1" dia. 
Tapping max capacity......................... 5/8"
 Milling max capacity......................... 7 inch3/min 
Way surfaces hardened and ground Turcite coating on all slide ways 
Automatic lubrication pump 
Auxiliary function hardware 
Limit switches 

Equipped With
Prototrak SMX CNC Control 
Power Draw Bar
Advanced Features
Network
Programmable E Head
Traking/Handwheels 

SPECIFICATIONS ARE SUBJECT TO BUYER INSPECTION

DISCLAIMER: The information and specifications listed on this page are believed to be accurate. Photographic representations are for illustrative purposes only, and may not be of the actual machine. International Machine is not responsible for any typographical or other errors that may exist.

 


More from this collection