USED 2010 MORI SEIKI NL 2500 SY/1250

LOGIN TO SEE PRICE

$189,000.00

SHARE ON SOCIAL MEDIA

  • SPECIFICATIONS
  • TRUCKING  
  • FINANCING

GENERAL SPECIFICATIONS


GENERAL SPECIFICATIONS

PICTURED LIVE TOOLING CAN BE PURCHASED FOR AN ADDITIONAL PRICE.  CONTACT YOUR SALES REPRESENTATIVE TODAY.
Main Spindle motor 18.5/15KW (4000min-1)
Sub Spindle motor 11/7.5KW (6000min-1)
Rotary Tool spindle motor 5.5/3.7KW (6000min-1)
Spindle orientation
Inverter controlled oil cooler
12 Station bolt-on tool type turret
Manual in-machine tool pre-setter (built-in type) – main spindle
Manual in-machine tool pre-setter (removable type) – sub-spindle
Parts catcher
Coolant system
Automatic power off
Built-in work light
Hand tools
Full cover
Impact resistant viewing window
Door interlock system
Chuck stroke end check
Chuck cylinder check valve
Low air pressure detection switch
Low hydraulic pressure detection switch
Overtravel software
Dual footswitch for chuck operation – both spindles
G10 Programmable data input
Transformer
 
Capacity
Swing Over Bed mm (in) 923.8 (36.37) < interference with front cover: 579.8 (22.83)
Swing Over Cross Slide mm (in) 755 (29.72)
Maximum Distance Between Spindle Nose Surfaces mm (in) 961 (37.83)
Max. Turning Diameter mm (in) 356 (14.02)
Standard Turning Diameter mm (in) 275 (10.83)
Max. Turning Length mm (in) 705 (27.76)
Bar Work Capacity mm (in) 80 (3.15)

Travel
X-Axis Travel mm (in) 260 (10.24)
Y-Axis Travel mm (in) -50, +50 (-1.67, +1.67)
Z-Axis Travel mm (in) 795 (31.30)
Spindle 2 B-Axis Travel mm (in) 734 (28.90)

Spindle 1
Spindle Speed Range min -1 4000
Number of Spindle Speed Ranges. Step 2
Spindle Nose Type JIS A-2
Through-Spindle Hole Diameter mm (in) 91 (3.58)
Min. Spindle Indexing Angle 0.001
Spindle Bearing Inner Diameter mm (in) 140 (5.51)
Chuck 10” Solid Chuck & Hollow Chuck

Spindle 2
Spindle Speed Range min -1 6000
Number of Spindle Speed Ranges Step 1
Spindle Nose Type JIS-A5
Through-Spindle Hole Diameter mm (in) 43 (1.69) [73(2.87)]
Min Spindle Indexing Angle 0.001
Spindle Bearing Inner Diameter mm (in) 85 (3.35)
Chuck 6” Solid Chuck & Hollow Chuck

 

Feed Rates
Rapid Traverse Rate mm/min (ipm) X,Y,B: 30000 (1181.10) Y: 10000 (393.70)
Jog Feed rate mm/min (ipm) X,Y,Z,B: 0~5000 (0 to 196.85)

Motors
Spindle 1 Drive motor
(30 min./Continuous Rating) kW (HP) 18.5/15 (26/22) [24.79/20.10 (34.84/29.48)]
Spindle 2 Drive motor (30 min./Continuous Rating) 11/7.5 (14.74/10.05)
Rotary Tool Spindle Drive Motor (5 min./ Continuous Rating) 5.5/3.7 (7.37/4.96)
Feed Motors kW (HP)
X, Z: 3.5 (4.69)
Y, B: 2.0 (2.68)
Hydraulic Pump Motor kW (HP) 1.5 (2.01)
Lubricant Pump Motor kW (HP) 0.02 (0.03)
Coolant Pump Motor kW (HP) 0.52 (0.70) <0.325 (0.44)>
Oil Cooler Pump Motor kW (HP) Compressor: 0.5(0.67) Circulating Pump: 0.4(0.54)

Required Power/ Air Sources
Electrical Power Supply (continuous rating) kVA 39.20 [47.0]
Compressed Air Supply
MPa (psi) L/min (gpm) 0.5 MPa (72.50), 100 (26.4)

Tank Capacity
Hydraulic Oil Tank Capacity L (gal.) (2.64)
Lubricant Tank Capacity L (gal) 4 (1.06)Coolant Tank Capacity L (gal) 246 (64.94)
Oil Temperature Controller Capacity L (gal) 10 (2.64)

Machine Size
Floor Space (Chip Conveyor Included) mm (in) 3100 (122.05)
< Chip Conveyor: +684.3 (+26.94)> x 2000 (78.74)
Machine Mass kg (lb.) 6200 (13640)

 


SPECIFICATIONS ARE SUBJECT TO BUYER INSPECTION DISCLAIMER: 


The information and specifications listed on this page are believed to be accurate. Photographic representations are for illustrative purposes only, and may not be of the actual machine. International Machine is not responsible for any typographical or other errors that may exist.

COMING SOON

International Machine has partnered with the best financing company in the capital machinery and equipment industry to make sure that we give our customers the very best. 


Complete Capital ServiceWith Complete Capital Services you enjoy the benefits of equipment financing with an easy application process and quick turnaround. We help you get fast access to the equipment you need, and we structure your payment options to suit your business’s unique circumstances.