Used 2008 Southwest Trak FHM5
Table size - 50" x 12"
T-slots (number x width x pitch) - 3 x16mm x 63.5mm
Travel (X, Y, Z axis) - 40" x 20" x 24"
Quill diameter - 4.13"
Spindle taper - NMTB 40
Spindle speed range RPM - 160-4000
Spindle center to column face - 20.5"
Spindle motor power - 5 HP
Power requirement, control - 110V, 1P, 15A
Power requirement, machine - 220V, 3P, 60HZ Current,
Full Load Amps - 17.5 FLA
Maximum weight of workpiece - 1760 lbs.
Height of table from bottom of bed - 41"
Maximum spindle nose to table - 24"
Minimum height - 87" Maximum height - 100"
Width of machine including table - 94"
Length with electric box door closed - 80"
Overall width including full table travel - 136"
Overall length with electrical door open - 105"
Footprint - 24" x 48.4"
Way surface - dovetail X axis; square ways Y and Z axis
Weight (approximate) net - 4400 lbs.
Weight (approximate) shipping - 4700 lbs.
Drill max capacity - 1" dia.
Tapping max capacity - 5/8"
Milling max capacity - 5 inch3/min
Prototrak SMX Control
Power Draw Bar
Programmable E Head
SPECIFICATIONS ARE SUBJECT TO BUYER INSPECTION
DISCLAIMER: The information and specifications listed on this page are believed to be accurate. Photographic representations are for illustrative purposes only, and may not be of the actual machine. International Machine is not responsible for any typographical or other errors that may exist.