Used 2007 Mori Seiki Nt4250 Turning Center
Used 2007 Mori Seiki Nt4250 Turning Center
Used 2007 Mori Seiki Nt4250 Turning Center
Used 2007 Mori Seiki Nt4250 Turning Center
Used 2007 Mori Seiki Nt4250 Turning Center
Used 2007 Mori Seiki Nt4250 Turning Center
Used 2007 Mori Seiki Nt4250 Turning Center

USED 2007 MORI SEIKI NT4250

1 FOR SALE POSSIBLE 2

GENERAL SPECIFICATIONS

NEWLY INSTALLED SPINDLE

NC SYSTEM FS-31IA5(MAPPS 3)

MAPPS MAPPS 3

VOLTAGE OF CUSTOMER'S FACTORY (V) 220 V

FREQUENCY (HZ) 60 HZ

SETTING UNIT INCH

DESTINATION U.S.A.

STANDARD NOT COMPATIBLE TO EN

UL LABEL PROVIDED

EXPORT TRADE CONTROL ORDER APPLIED

PAINT COLOR COOL SILVER

LANGUAGE ON NAME PLATES ENGLISH

LANGUAGE OF INSTRUCTION MANUAL ENGLISH

NC MANUAL AS BOOKLETS

NOMINAL BED LENGTH 1500 MM

SPINDLE (SPINDLE 1) OUTPUT (KW) STANDARD (22/18.5 KW)

SPINDLE (SPINDLE 1) SPEED (MIN-1) 4000 MIN-1

SPINDLE (SPINDLE 1) THROUGH-SPINDLE HOLE DIA. (MM) 91 MM DIA.

SPINDLE (SPINDLE 1) CHUCK TYPE HOLLOW CHUCK (10") (CHUCK BODY UNNECESSARY)

SPINDLE (SPINDLE 1) CHUCK MANUFACTURER KITAGAWA

SPINDLE HOLE TAPER HSK 63

SPINDLE 2 PROVIDED

SPINDLE 2 OUTPUT (KW) STANDARD (22/18.5 KW)

SPINDLE 2 SPEED (MIN-1) 4000 MIN-1

SPINDLE 2 THROUGH-SPINDLE HOLE DIA. (MM) 91 MM DIA.

SPINDLE 2 CHUCK TYPE HOLLOW CHUCK (10") (CHUCK BODY UNNECESSARY)

SPINDLE 2 CHUCK MANUFACTURER KITAGAWA

TURRET (TURRET 1) Y-AXIS PROVIDED

TURRET (TURRET 1) MILLING FUNCTION PROVIDED

TURRET (TURRET 1) ROTARY TOOL SPINDLE SPEED (MIN-1) 12000 MIN-1

TURRET (TURRET 1) B-AXIS INDEX ANGLE 1 DEGREE

TURRET 2 PROVIDED

TYPE OF TURRET 2 12 STATIONS

TURRET 2 MILLING FUNCTION PROVIDED

TURRET 2 TOOL MOUNTING METHOD BY BOLTS

TAILSTOCK UNNECESSARY

TOOL STORAGE CAPACITY 40

CHIP CONVEYOR CHIP CONVEYOR IS BOUGHT BY USER

CHIP DISPOSAL DIRECTION RIGHT DISPOSAL TYPE

CHIP CONVEYOR TYPE HINGE

TOOL SPINDLE THROUGH COOLANT SYSTEM PROVIDED

SUPER HIGH-PRESSURE COOLANT SYSTEM OGURA CLUTCH/SHINANO KIKOU (7 MPA) INTERFACE ONLY

SPINDLE 2 CHUCK AIR BLOW PROVIDED

TOOL TIP (TURRET 1) AIR BLOW PROVIDED

(SPINDLE 1) IN-MACHINE TOOL PRESETTER AUTOMATIC

SIGNAL LIGHT 3-TIER TOWER(RED,MILKY WHITE,GREEN)

CHUCK FOOTSWITCH SINGLE

SPINDLE (SPINDLE 1) CHUCK HIGH/LOW PRESSURE SYSTEM PROVIDED

SPINDLE 2 CHUCK HIGH/LOW PRESSURE SYSTEM PROVIDED

SIMULTANEOUS 5 AXIS CONTROLL PROVIDED

STEP-DOWN TRANSFORMER UNNECESSARY

STEP-DOWN TRANSFORMER CABLE UNNECESSARY

CONTROL BOX MAKER M-TEC

LANGUAGE ON NC SCREEN ENGLISH

LANGUAGE ON PC SCREEN ENGLISH

LANGUAGE ON WARNING SCREEN ENGLISH

LANGUAGE ON MAPPS2/3/4 SCREEN ENGLISH

TOOL CENTER POINT CONTROL PROVIDED

PART PROGRAM STRAGE (BYTE) 8 MBYTE (20480 M)

NUMBER OF STORED PROGRAMS 1000

REMOTE COMMUNICATION FUNCTION FAST DATA SERVER (100BASE-TX)

USER MEMORY AREA(BUILT-IN MAPPS) 50 MB

NUMBER OF TOOL OFFSET PAIRS 240

TOOL OFFSET FOR 5-AXIS MACHINING PROVIDED

NUMBER OF WORK COORDINATE SYSTEM PAIRS 6

PROGRAMMABLE DATA INPUT PROVIDED

NUMBER OF CUSTOM MACRO COMMON VARIABLES 600

AI CONTOUR CONTROL 2

DIAMETER/RADIUS DYNAMIC EXCHANGE PROVIDED

TOOL LIFE MANAGEMENT B

NUMBER OF TOOL LIFE MANAGEMENT (MORI) MAX. 120 PAIRS * 8

LOAD MONITOR B

NETWORK MORI-NET (MACHINE SIDE)

 

SPECIFICATIONS ARE SUBJECT TO BUYER INSPECTION

DISCLAIMER: The information and specifications listed on this page are believed to be accurate. Photographic representations are for illustrative purposes only, and may not be of the actual machine. International Machine is not responsible for any typographical or other errors that may exist


More from this collection