SKU Number: 15124
Bore size 3/4" to 8" diameter
Stroke length 3/4" to 12"
Speed range (adjustable in 10 rpm increments) 90 - 240 (low)
170 - 550 (high)
Stroker (adjustable in 10 spm increments) 40 to 100 spm
Max feed rate 0.030" / minute
Maximum operating torque 10 ft-lb.
Work envelope 57" x 35" x 32"
Maximum part weight 1,500 lb.
Spindle motor 4 hp
Stroker motor 3/4 hp
Operating voltage 230V
Coolant capacity 38 - 63.5 gallons
Overall dimensions 86" x 87" x 88" H
Approx. weight 3,000 lbs.
This is the tooling that is installed in the hone - 12 position (6 roughing positions and 6 finishing positions). The mark on one of the roughing inserts is a Sunnen part (GT86-6 (86 grit?), GMG7791, SP290060).
Machine is equipped with micro processor control w/ storage for 20 set ups, graphic bore profile display in tenths, two-stage honing cycle, spark-out mode, size-Loc (repeats bore size for next operation), spindle speed and stroke speed adjusted thru operator interface, coolant filter system, dual cartridge filter system, extra filters, tooling
Located in Grand Rapids, Michigan
SPECIFICATIONS ARE SUBJECT TO BUYER INSPECTION
DISCLAIMER: The information and specifications listed on this page are believed to be accurate. Photographic representations are for illustrative purposes only, and may not be of the actual machine. International Machine is not responsible for any typographical or other errors that may exist.