GOT SURPLUS MACHINERY? CALL US TODAY 248.845-2140
GOT SURPLUS MACHINERY? CALL US TODAY 248.845-2140
Contact Us
Mori Seiki Sh 8000 2001 Horizontal Machining Center
Mori Seiki Sh 8000 2001 Horizontal Machining Center
Mori Seiki Sh 8000 2001 Horizontal Machining Center
Mori Seiki Sh 8000 2001 Horizontal Machining Center
Mori Seiki Sh 8000 2001 Horizontal Machining Center
Mori Seiki Sh 8000 2001 Horizontal Machining Center
Mori Seiki Sh 8000 2001 Horizontal Machining Center

Mori Seiki SH-8000 (2001)

TRAVEL: SH-8000
X-Axis Travel: (Longitudinal Movement of Column) 51.2"
Y-Axis Travel: (Vertical Movement of Spindle Head) 47.2"
Z-Axis Travel: (Cross Movement of Table) 43.3"
Distance from Pallet Surface to Spindle Center: 2.0"- 49.2"
Distance from Table Center to Spindle Gage Plane: 7.9”- 51.2”

TABLE:
Pallet Working Surface: 31.5” x 31.5”
Maximum Workpiece Swing Diameter: 51.2”
Pallet Loading Capacity: 4,400 Lbs. <5,720 Lbs.>
Maximum Workpiece Height: 51.2"
Table Surface Configuration:M16 (1/2-13 UNC) Tap: 24 Holes, Pitch (6.2”)
Minimum Table Indexing Angle: 1° [Rotary Table: 0.001 Degree]
Table Indexing Time: 3.4 Sec./ 4.2 Sec. (90°)

SPINDLE:
Maximum Spindle Speed: 15,000 RPM
Number of Spindle Speed Ranges: 1
Type of Spindle Taper Hole: 7/24 Taper, No. 50
Spindle Bearing Inner Diameter: 4.3"

FEEDRATE:
Rapid Traverse Rate: 1,653.5 IPM
Feedrate: 0.01-1,653.5 IPM
Jog Feedrate: 0-50 IPM <15 Steps>

AUTOMATIC TOOL CHANGER:
Type of Tool Shank: CAT 50 V-Flange
Type of Retention Knob: 90° Type
Tool Storage Capacity: 60 Std.
Max. Tool Diameter: (without adjacent tools) 4.9" (12.6")
Max. Tool Length: 19.7"
Max. Tool Weight: 66 Lbs.
Method of Tool Selection: Fixed address,shorter route
random access
Tool Change Time: (Tool-to-Tool) 2.5 Sec.
Tool Change Time: (Chip-to-Chip) 6 Sec.

AUTOMATIC PALLET CHANGER:
Number of Pallets: 2 Standard
Method of Pallet Change: Turn-Type
Pallet Changing Time: 14 Seconds

MOTOR:
Spindle Drive Motor: (30 min./cont.) 40/33.5 HP
Feed Motor: (X,Y & Z Axis) 7.9/9.7/9.7 HP
Hydraulic Pump Motor: 3 HP
Coolant Pump Motor: 1.3 x 2 HP

SPECIFICATIONS ARE SUBJECT TO BUYER INSPECTION

 

DISCLAIMER: The information and specifications listed on this page are believed to be accurate. Photographic representations are for illustrative purposes only, and may not be of the actual machine. International Machine is not responsible for any typographical or other errors that may exist.

 


More from this collection