SPECIFICATIONS:
TRAVEL: SH-8000
X-Axis Travel: (Longitudinal Movement of Column) 51.2" – 1,300 mm
Y-Axis Travel: (Vertical Movement of Spindle Head) 47.2" – 1,200 mm
Z-Axis Travel: (Cross Movement of Table) 43.3" – 1,100 mm
Distance from Pallet Surface to Spindle Center: 2.0"- 49.2"
Distance from Table Center to Spindle Gage Plane: 7.9”- 51.2”
TABLE:
Pallet Working Surface: 31.5” x 31.5”
Maximum Workpiece Swing Diameter: 51.2”
Pallet Loading Capacity: 4,400 Lbs.
Maximum Workpiece Height: 51.2"
Table Surface Configuration:M16 (1/2-13 UNC) Tap: 24 Holes, Pitch (6.2”)
Minimum Table Indexing Angle: 1°
Table Indexing Time: 3.4 Sec
SPINDLE:
Maximum Spindle Speed: 15,000 RPM
Number of Spindle Speed Ranges: 1
Type of Spindle Taper Hole: 7/24 Taper, No. 50
Spindle Bearing Inner Diameter: 4.3"
FEEDRATE:
Rapid Traverse Rate: 1,653.5 IPM
Feedrate: 0.01-1,653.5 IPM
Jog Feedrate: 0-50 IPM <15 Steps>
AUTOMATIC TOOL CHANGER:
Type of Tool Shank: CAT 50 V-Flange
Type of Retention Knob: 90° Type
Tool Storage Capacity: 60 Std.
Max. Tool Diameter: (without adjacent tools) 4.9" (12.6")
Max. Tool Length: 19.7"
Max. Tool Weight: 66 Lbs.
Method of Tool Selection: Fixed address,shorter route
random access
Tool Change Time: (Tool-to-Tool) 2.5 Sec.
Tool Change Time: (Chip-to-Chip) 6 Sec.
AUTOMATIC PALLET CHANGER:
Number of Pallets: 2 Standard
Method of Pallet Change: Turn-Type
Pallet Changing Time: 14 Seconds
MOTOR:
Spindle Drive Motor: (30 min./cont.) 40/33.5 HP & 309.78 ft/lbs. torque @ 1,200 rpm(6,000 spdl)
Feed Motor: (X,Y & Z Axis) 7.9/9.7/9.7 HP
Hydraulic Pump Motor: 3 HP
Coolant Pump Motor: 1.3 x 2 HP
SH-8000 MACHINE SPECIFICATIONS CONTINUED
POWER SOURCE: SH-8000
Electrical Power Supply: 86.2 KVA
Compressed Air Supply: 72.5 PSI, 137.3 GPM
TANK CAPACITY:
Hydraulic Oil Tank Capacity: 10.6 Gal.
Lubrication Tank Capacity: .2 Gal. (for Spindle)
. 2 Gal. (for Roller Guide & Ball Screw.)
19.5 Gal. (Oil Cooler)
Coolant Tank Capacity: 184.8 Gal.
MACHINE SIZE:
Machine Height: 147.5”
Standard Floor Space: Actual width under 12’x 20’ long 173.0" x 315.1”
Weight of Machine: 64,856 Lbs.
ACCURACY: (when new)
Positioning Accuracy: 0.0002"
Repeatability: +/-0.00004"
Table Indexing Accuracy: 0°0'3" (for 1°0°
indexing)
(For Rotary Table:
0°0'5")
Table Indexing Repeatability: +/-0°0'1" (1°
indexing)
(For Rotary Table:
+/-0°0'1")
Pallet Changing Repeatability: (X, Y & Z) 0.0001"
EQUIPPED WITH:
Turbo Md. 6586-8055 Rear external chip conveyor with drum type filter for “Fines”
Auto Coupler hydraulic system for fixtures on turret
60 place ATC
15,000 rpm
Coolant thru spindle
48 sets of additional work coordinates
Custom Macro B
Tool Life Management
One degree indexing
Fanuc 18iMA control with MAPPS
Two Signal Light Towers
Manuals included: Installation, Maintenance, Parts, and 2) Electrical Circuit manuals
Special shipment width Option: Not to exceed 3,325 mm or 130.91” – actual machine base width is 125.5”. The ATC enclosure hangs out about 8”. It came thru a 144” wide door in one piece when new.
Approximately 125.5” high (plus servo motor on top of machine) x 20’ long
SPECIFICATIONS ARE SUBJECT TO BUYER INSPECTION
DISCLAIMER: The information and specifications listed on this page are believed to be accurate. Photographic representations are for illustrative purposes only, and may not be of the actual machine. International Machine is not responsible for any typographical or other errors that may exist.