GOT SURPLUS MACHINERY? CALL US TODAY 248.845-2140
GOT SURPLUS MACHINERY? CALL US TODAY 248.845-2140
Contact Us
Mori Seiki Sh-8000 Horizontal Machining Center
Mori Seiki Sh-8000 Horizontal Machining Center
Mori Seiki Sh-8000 Horizontal Machining Center
Mori Seiki Sh-8000 Horizontal Machining Center
Mori Seiki Sh-8000 Horizontal Machining Center
Mori Seiki Sh-8000 Horizontal Machining Center
Mori Seiki Sh-8000 Horizontal Machining Center
Mori Seiki Sh-8000 Horizontal Machining Center
Mori Seiki Sh-8000 Horizontal Machining Center

Mori Seiki SH-8000

SPECIFICATIONS:

 

TRAVEL: SH-8000 

X-Axis Travel: (Longitudinal Movement of Column)                              51.2" – 1,300 mm 

Y-Axis Travel: (Vertical Movement of Spindle Head)                       47.2" – 1,200 mm 

Z-Axis Travel: (Cross Movement of Table)                       43.3" – 1,100 mm 

Distance from Pallet Surface to Spindle Center:                    2.0"- 49.2" 

Distance from Table Center to Spindle Gage Plane:                    7.9”- 51.2” 

 

TABLE: 

Pallet Working Surface:                 31.5” x 31.5” 

Maximum Workpiece Swing Diameter:                      51.2” 

Pallet Loading Capacity:                  4,400 Lbs.  

Maximum Workpiece Height:                      51.2" 

Table Surface Configuration:M16 (1/2-13 UNC) Tap: 24 Holes, Pitch (6.2”)  

Minimum Table Indexing Angle:        1°  

Table Indexing Time:             3.4 Sec 

 

SPINDLE: 

Maximum Spindle Speed:                   15,000 RPM 

Number of Spindle Speed Ranges:                          1 

Type of Spindle Taper Hole:                 7/24 Taper, No. 50 

Spindle Bearing Inner Diameter:                        4.3" 

 

FEEDRATE: 

Rapid Traverse Rate:                    1,653.5 IPM 

Feedrate:                0.01-1,653.5 IPM 

Jog Feedrate:              0-50 IPM <15 Steps> 

 

AUTOMATIC TOOL CHANGER: 

Type of Tool Shank:               CAT 50 V-Flange 

Type of Retention Knob:                     90° Type 

Tool Storage Capacity:                      60 Std.  

Max. Tool Diameter: (without adjacent tools)                    4.9" (12.6") 

Max. Tool Length:                        19.7" 

Max. Tool Weight:                      66 Lbs. 

Method of Tool Selection:          Fixed address,shorter route 

                 random access 

Tool Change Time: (Tool-to-Tool)                      2.5 Sec.  

Tool Change Time: (Chip-to-Chip)                        6 Sec.  

 

AUTOMATIC PALLET CHANGER: 

Number of Pallets:                  2 Standard 

Method of Pallet Change:                  Turn-Type 

Pallet Changing Time:                 14 Seconds 

 

MOTOR: 

Spindle Drive Motor: (30 min./cont.)                40/33.5 HP & 309.78 ft/lbs. torque @ 1,200 rpm(6,000 spdl) 

Feed Motor: (X,Y & Z Axis)                7.9/9.7/9.7 HP 

Hydraulic Pump Motor:                     3 HP 

Coolant Pump Motor:                  1.3 x 2 HP 

 

 

SH-8000 MACHINE SPECIFICATIONS CONTINUED 

 

POWER SOURCE:          SH-8000 

Electrical Power Supply:           86.2 KVA 

Compressed Air Supply:     72.5 PSI, 137.3 GPM 

 

TANK CAPACITY: 

Hydraulic Oil Tank Capacity:           10.6 Gal. 

Lubrication Tank Capacity:      .2 Gal. (for Spindle) 

                                                                        . 2 Gal. (for Roller Guide & Ball Screw.) 

      19.5 Gal. (Oil Cooler) 

Coolant Tank Capacity:           184.8 Gal. 

 

MACHINE SIZE: 

Machine Height:             147.5” 

Standard Floor Space:  Actual width under 12’x 20’ long                        173.0" x 315.1” 

Weight of Machine:          64,856 Lbs. 

 

ACCURACY: (when new) 

Positioning Accuracy:            0.0002" 

Repeatability:        +/-0.00004" 

Table Indexing Accuracy:       0°0'3" (for 1°0° 

           indexing) 

       (For Rotary Table: 

            0°0'5") 

Table Indexing Repeatability:         +/-0°0'1" (1° 

            indexing) 

      (For Rotary Table: 

           +/-0°0'1") 

Pallet Changing Repeatability: (X, Y & Z)             0.0001" 

 

 

EQUIPPED WITH: 

Turbo Md. 6586-8055 Rear external chip conveyor with drum type filter for “Fines” 

Auto Coupler hydraulic system for fixtures on turret 

60 place ATC 

15,000 rpm 

Coolant thru spindle 

48 sets of additional work coordinates 

Custom Macro B 

Tool Life Management 

One degree indexing 

Fanuc 18iMA control with MAPPS  

Two Signal Light Towers 

Manuals included:  Installation, Maintenance, Parts, and 2) Electrical Circuit manuals 

 

Special shipment width Option:  Not to exceed 3,325 mm or 130.91” – actual machine base width is 125.5”. The ATC enclosure hangs out about 8”. It came thru a 144” wide door in one piece when new. 

 

Approximately 125.5” high (plus servo motor on top of machine) x 20’ long 

 

SPECIFICATIONS ARE SUBJECT TO BUYER INSPECTION

 

DISCLAIMER: The information and specifications listed on this page are believed to be accurate. Photographic representations are for illustrative purposes only, and may not be of the actual machine. International Machine is not responsible for any typographical or other errors that may exist.

 


More from this collection